Mold inspection simply identifies the presence of mold and generally defines the size of the
problem, usually in square footage. Mold testing attempts to identify what specific type of mold is in your home and how many mold spores are in the air.
Mold Inspection Pricing
Prevention is always better than cure, and that goes for mold infestation as well. Mold Assessment Consultants of Texas in Houston, Texas helps you save money on future repairs by providing you with mold assessment consultation. See our prices below.
*Inspection Pricing Includes: Assessment, Infrared Scan, Air Moisture reading(s) and Moisture Meter Probe
** Inspection pricing do not include: Samples.
SqFt | Cost | Property Type |
|---|---|---|
0 – 1,499 | $330 | Single – Family |
1,500 – 1,999 | $380 | Single – Family |
2,000 – 2,499 | $430 | Single – Family |
2,500 – 2,999 | $490 | Single – Family |
3,000 – 3,499 | $560 | Single – Family |
3,500 – 3,999 | $640 | Single – Family |
4,000 – 4,499 | $730 | Single – Family |
4,500 – 4,999 | $830 | Single – Family |
SqFt | Cost | Property Type |
|---|---|---|
0 – 1,499 | $280 | Townhomes |
1,500 – 1,999 | $330 | Townhomes |
2,000 – 2,499 | $380 | Townhomes |
2,500 – 2,999 | $440 | Townhomes |
3,000 – 3,499 | $510 | Townhomes |
3,500 – 3,999 | $590 | Townhomes |
4,000 – 4,499 | $680 | Townhomes |
4,500 – 4,999 | $780 | Townhomes |
SqFt | Cost | Property Type |
|---|---|---|
0 – 1,499 | $230 | Apt / Condo |
1,500 – 1,999 | $280 | Apt / Condo |
2,000 – 2,499 | $330 | Apt / Condo |
2,500 – 2,999 | $390 | Apt / Condo |
3,000 – 3,499 | $460 | Apt / Condo |
3,500 – 3,999 | $540 | Apt / Condo |
4,000 – 4,499 | $630 | Apt / Condo |
4,500 – 4,999 | $730 | Apt / Condo |
Limited Assessment(s) 1 to 3 rooms: |
|---|
Single Family $299 |
Townhome $249 |
Apt/Condo $199 |
Additional Room(s) $25 each |
Sample(s) Only Visit ($150 service fee): Cost does not include: Samples |
|---|
Air Samples $99 each |
Direct Samples $99 each |
Mold Assessment (including Humidity & CO2 Levels)
0 to 999 SqFT, $129
1000 to 1999 SqFT, $229
2000 to 2999 SqFT, $329
3000 to 3999 SqFT, $429
4000 to 4999 SqFT, $529
1000 to 1999 SqFT, $229
2000 to 2999 SqFT, $329
3000 to 3999 SqFT, $429
4000 to 4999 SqFT, $529
Mold Air Samples (recommend 2 min) 1. Outdoor Baseline Sample 2. Indoor Sample
$99/room
Air samples can be used to gather data about mold spores present in the interior of a house. These samples are taken by using a pump that forces air through a collection device which catches mold spores. The sample is then sent off to a laboratory to be analyzed.
Mold Surface Sample (Tape Or Swab)
$99/each surface
With swab mold samples, the tip of sterile surface swabs are used to rub the suspect area and submit it to a laboratory where the sample will be cultured and the type of mold identified by a laboratory for analysis. Swab samples are easy ways to sample suspect areas for mold contamination.
Asbestos Samples
$99/room
We provide a comprehensive survey of the space and collect various material samples. Those samples are sent to an accredited laboratory for analysis. When we receive the results, we provide you with a detailed report that includes an assessment of our findings and recommendations.
Beyond Standard Air And Surface Samples - Molds, Mycotoxins, & More
Many health effects are caused by exposure to the interior environment of Water Damaged Buildings (WDB). The complex mixture of contaminants present in the air and in the dust in WDB form a toxic chemical stew
Mold Sample (Bacteria)
$249
While mold and bacteria are often grouped together, they are two very different organisms. Molds are typically a lot larger than bacteria and possess hyphae or long, multi-celled filaments. Bacteria are generally smaller and more numerous in size but less complex
Sampling for Endotoxins
$649
Also called Lipopolysaccharides (LPS), are cell wall components of bacteria. They are shed into the environment of (WDB) water-damaged buildings upon death of the bacteria. LPS cause inflammatory responses via signaling pathways in the body, releasing inflammatory cytokines. LPS aggravate existing lung disease (asthma, HP), can cause inflammation of the lungs and are synergistic with mycotoxins.
Sampling for EPA 36 / ERMI
$649
ERMI stands for Environmental Relative Moldiness Index. The analysis from this test can be used by researchers to estimate the levels and types of mold inside a property. The test is done by collecting a dust sample.
Sampling for Methamphetamines
$629
Surface wipe sampling for methamphetamine is a standard protocol in many jurisdictions for sampling at suspected or known former clandestine methamphetamine laboratories, but this method relies on samples being taken from representatively contaminated surfaces.
Sampling for Mycotoxins
$399
Toxic chemicals that are present on spores and small fragments of mold and fungus that are released into the air.
